ARIZONA AMMUNITION, LLC.®

 

Home Up AZ Ammo Show Schedule Services About Us 50 BMG General Cleaning Photo & Schedule Links Feedback Targets

 

 

BRINGING YOU THE NEXT LEVEL OF

DRY FILM LUBRICANT FOR BULLETS!

Our thoughts on bullets in general (click)

IT IS TOUGH...IT REDUCES WEAR! ... IT REDUCES FOULING!...IT IS SLIPPERY... NO SPECIAL CLEANING!

ARIZONA AMMUNITION, LLC.® ACCULUBE 10X is an extremely wear resistant dry film lubricant that molecularly bonds with the bullet without heat, resins, carriers, tumbling, or any type of binder. The molecular bond established is so complete that only removal of the metal can ever affect the lubricity, which has been built into the bullet by the ACCULUBE 10X process. ACCULUBE 10X CAN BE APPLIED TO A FEATHER WITHOUT DAMAGE TO THE FEATHER!

IT IS SUPER SLIPPERY....REDUCES FRICTION!!

Capable of withstanding pressures of up to 350,000 PSI and temperatures ranging from - 350 degrees to +1,000 in a controlled atmosphere like a rifle barrel.  ACCULUBE 10X built-in lubricity yields a dynamic friction coefficient of only 0.030. By comparison, the dynamic friction coefficients of MOLY is 0.22 or more than 7 times less slippery than ACCULUBE 10X. (Using steel to steel as a basis)

bullet0.000020 of an inch thick-certified for NASA applications!
bulletDoes not alter the bullet in any way!
bulletComplete and uniform coverage on every application-every time!
bulletDoes not come off on your hands. Remains on the bullet longer too! Greatly reduced fouling!

NO BUILD-UP        NO CORROSION        REDUCED FOULING

 

IT DOES NOT ALTER THE BULLET DIMENSIONS IN ANY WAY!

Transmigration of ACCULUBE 10X into the molecular structure of the bullet maintains dimensional integrity at 15 to 20 millionths of an inch! There is no increase in diameter to effect chamber pressure!  

NON-DAMAGING APPLICATION...IT IS ALWAYS EVENLY COATED!

No stress inducing heat, no cold, no tumbling, no uneven spray, and absolutely no distortion!  All bullets are processed at room temperature. Bullets are ready for immediate use with no restrictions. The application will not change the bullet jacket in any way. No wax-- just ACCULUBE 10X.

IT IS CLEAN...DOES NOT CONTAMINATE THE ENVIRONMENT

ACCULUBE 10X is nontoxic, inter, insoluble, and completely non-corrosive. NO BUILD UP!

FIRST SHOT GOES WHERE THE LAST SHOT GOES... NO BREAK IN!

Unlike many other coatings, ACCULUBE 10X does not require any "curing or break-in of the rifle barrel. ACCULUBE 10X does not remain in the barrel and does not reduce the accuracy of the bullet or the rifle barrel. Just start shooting and enjoy the low fouling, no buildup, and non-corrosion of ACCULUBE 10X.

ACCULUBE 10X is an ARIZONA AMMUNITION, LLC.® world wide exclusive!

 

MORE ON THE NEXT LEVEL OF BULLET LUBRICANTS

We are the leader in the application and use of coated/lubricated bullets. We have been applying the NECO process for over 4 years with great success. In our research we have found a new lubrication many levels above moly disulfide. It is an incredible aerospace product used for the past 31 years by NASA, Garrett, McDonnell Douglas, General Electric, Rockwell International, Walter Kiddle, Otis, and 750 other aerospace and hi-tech companies to solve high friction problems in critical areas. It is likely that your computer hard drive is running on this fine lubricant as you read this information! IT IS INCREDIBLE AND IT WORKS! 31 YEARS OF SUCCESS! Our tests are real and with all caliber's of rifles and many premium bullets. It can be applied to all types and brands of bullets!

1.

Application requires no heat! 

2.

Application requires no liquid! 

3.

Application requires no cold! 

4.

Application requires no pressure!

5.

No EPA restrictions-totally safe! 

6.

Applications requires no adhesives!

7.

No out gassing! (no corrosion) 

8.

Does not come off on your hands! 

9.

Consistent coating-0.000020 thick to 1/2 micron (a human hair is 50 microns thick!)

10.

Remain flexible on bullet and during firing! Stays on the bullet!

11.

Does not increase the diameter of the bullet!

12.

Better adhesion after firing! Stays on the bullet!

13.

Holds up above 1,000 degrees (in a controlled environment like a rifle barrel)

14.

Inert and nontoxic- completely safe!

15.

31 years of use by NASA- Original test sample is still intact today in the same condition as it was 31 years ago when submitted! Certified by NASA! 

16.

No residue

17.

No special barrel cleaning.

18.

No air borne particles

19.

No corrosion/No sulfur!

20.

Does not flake off!

21.

No binders

22.

Barrels are easier to clean! Less fouling!

23.

No build up in any way! It can not stick to itself-no way no how!

Sounds unbelievable?-- we thought so too, so we tested it.  For eight years we have fired it in 50 BMG rifles, 30's, 22's, 6mm, 375's, 416's, and more and found nothing- no problems! It works and it works good! The 3 time World Champion 1000 yard 50 BMG competitor Buddy Clifton used on every round he fired! The 1999 IBSA 1000 yard benchrest champion Karl Hunstiger uses it exclusively! Hunters, competitors, and plinkers are enjoying the low fouling advantage of ACCULUBE 10X on their bullets.

ARIZONA AMMUNITION, LLC.® now offers the general shooting public this incredible lubricant for their favorite bullet! We will coat your bullets or you can purchase bullets from us already ACCULUBE 10X coated! 

ACCULUBE 10X is a world wide exclusive for ARIZONA AMMUNITION, LLC. ®

PRICES

ARIZONA AMMUNITION, LLC.® ACCULUBE 10X COATED BULLET COST

bullet

We will ACCULUBE 10X coat your bullets or you can purchase coated bullets from us.  Your choice.

bullet

See our ACCULUBE 10X Coated Bullet Price list if you are interested in purchasing bullets already coated. (click)

bullet

More about Bullets (click)

bullet

ACCULUBE 10X Coating service for your bullets:

        If you decide to send us your bullets we recommend using the "One Price" shipping box from the United States Postal Service.  Anything under 70 pounds and it fits in their FREE box is one price.  See the USPS for more details. If you are worried about delivery use their "Delivery Confirmations" service for an additional $0.80.  It works!  Turn around time is about two (2) weeks not including shipping time.

bullet

Coating service for your small caliber bullets- $0.10 each  not including shipping

bullet

Coating service for your 50 BMG bullets-$0.20 each not including shipping

 

HomeAbout_Us.htmNews_Specials.htmOrder Info.htmpictures.htm

 

ARIZONA AMMUNITION, LLC.®

As of 12/15/2011 our site is under a much needed update-please bear with us-not all information is up to date yet.

Sales and Information (520) 586-2582

 

MAILING ADDRESS

P.O. BOX 304

DRAGOON, ARIZONA 85609

CALL FOR SHIPPING ADDRESS

EMAIL:

jschmidt@arizonaammunition.net

webmaster@arizonaammunition.net

This site is best viewed with Internet Explorer or Netscape 6.01 or higher.

Copyright © 2007 Arizona Ammunition, LLC.
Last modified: January 28, 2012